BALL PLUG WITH ROD

DESCRIPTION

The valve stem ball plug is made directly from round steel. Stem ball valves are usually used for high pressure trunnion ball valves or cryogenic ball valves. The processing procedure of this kind of spheres is complicated, the processing complexity is high, and the cost is higher than that of ordinary spheres. Sometimes the valve stem can be directly welded to the ball to reduce cost.

Specific Information

SHINEWAY specializes in the production of all kinds of fixed rod end balls. The ball plug is mainly used for high pressure fixed ball valves. The maximum diameter is 300 mm.


Hole diameter:

from DN50 mm to DN300 mm

Rated pressure:

from PN16 to PN420

Materials:

ASTM A105, A350 LF2, A182 F304, F304L, F316, F316L, F317, F321, A182 F51, A182 F53, A182 F55, A182 F60, A182 F6a/AISI 410, 17-4PH, Inconel 625, Inconel 718, Inconel 825 400, Monel 500, Hastelloy.

Surface treatment:

Coating: polishing, nickel plating, hard chrome plating, nitriding, ENP, hardfacing, laser hardfacing, HVOF plating, oxy-acetylene flame, plasma spraying process, tungsten carbide, chromium carbide, stellite, Inconel625, Monel400, Monel500, Ni60…


Additional designs:

- Ball type: solid, with stem, soft or hard seal

- Groove Design: The fixed ball is machined according to customer's drawing requirements.

- Scope of application: fixed ball valve, hard seal metal ball valve, high pressure ball valve.

I want to buy

Or please use the following table for reference. Our sales representative will contact you within 24 hours. Thank you for your attention to our products

Related Products
Solid valve balls

Our solid ball plugs are made directly from forgings or bar stock. Compared with...

Welded Steel Plate Ball Valves

Welded steel ball plugs are generally used to process large diameter stationary ...

Stainless steel ball plug

Stainless steel ball plugs are widely used in ball valves where corrosion resist...

Ball plug with trunnion

Шаровой кран с цапфой (фиксированный) имеет еще один шток в нижней части шара, к...

MULTI-WAY BALL PLUG

This tee ball plug has a T-shaped design, and the customer selects a flat milled...

BALL PLUG WITH ROD

The valve stem ball plug is made directly from round steel. Stem ball valves are...

Large diameter steel plate, welded fixed hollow ball plug

The steel ball is completely manufactured according to the drawings provided by ...

T-Ball Plug

Three-Way T-Ball Plugs are used in T-Type Three-Way Ball Valves to combine two i...

Floating ball welded plug with inner welded tube and crescent groove

The ball plug is a floating ball plug, consisting of a sphere, an inner welded p...

HOLLOW VALVE BALLS

The inside of the hollow ball plug is hollow, which is usually cut to length fro...